Freewing Pandora

Freewing Pandora
Brand: Freewing
Product Code: FWPANDORA
Availability: In Stock
Qty:     - OR -   Add to Wish List
Add to Compare


reewing Pandora Interchangeable Multi-combination RC Plane (Four Planes-in-One), Receiver Ready, Blue Color. The Best Trainer on the Market!

    The Freewing Pandora is not only one of the best beginner planes on the market, it is a great intermediate plane too. How is this possible? The Pandora ships as a high wing trainer. Simply change the canopy to the included low wing canopy and move the wings to the bottom of the fuselage and you now have a light sports low wing plane perfect for an intermediate pilot. In addition there are two sets of wheels. There is a set of tricycle landing gear whichis perfect for the RC Pilot Learning to fly, and there is a set of "Big Wheels" for Tail Dragger Configuration for the pilot looking to enhance their Warbird Training, these wheels are so good they even work on tall thick grass with ease. You literally have 4 combinations and can make 4 different planes from this 1 kit. This is a fantastic concept which is very enjoyable to fly. The Pandora does not get knocked around by wind as a smaller plane does and is the perfect setup for anyone looking to get into the hobby and learning to fly the right way. After getting the hang of flying your new model, simply change out the configuration to Low Wing and turn your trainer into a Aerobatic Sports plane at no additional cost.

NOTE: Optional flaps are molded into the wing along with aslot for the flap servos. Better yet, the hardware for the optional flap is included. You only need two 9 gram servos to make the flaps fully operational in about 10 minutes. If you use one flap channel, you will need a single Y lead, one forward 9g servo, and one reverse 9g servo. If you use two channels for flaps, you can use two forward 9g servos and reverse one channel using your radio. If you need any help picking servos, our team at Xtreme Hobby are happy to help.


  • High wing and low wing configuration included in one plane
  • Tricycle landing gear and tail dragger landing gear included
  • Included BIG wheels for tall grass takeoff and landings
  • Molded wing pocket for optional flap servos - push rods and linkage included
  • Durable EPO foam construction
  • Nylon hinges on all control surfaces
  • Brushless motor, ESC, and 4 micro servos installed





Flying Weight

1500g / 53 ounces

Power System

Brushless 3536-800Kv

Speed Control

30A, Internal BEC, T connector

Propeller / EDF

11x6  3 blade prop



Landing Gear

Fixed tricycle or tail dragger. Small or large wheels

Required Battery

11.1V 2200mAh 25C 3 cell LiPo (Not Included)

Required Radio

4 Channel (Not Included)




Optional -molded servo area and flap cut outs





Hinge Type

Nylon hinges on all control surfaces


EPO Foam


Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:

Powered By OpenCart
Willy's RC © 2018 - Free Opencart Themes by